Hi Amongst other things i have been working on two tractors today so i havnt been able to devote all my time to my major. Jobs on my massey ferguson 35: Painted radiator painted injector pump and fuel lines fitted pick up hitch and plate mounted to underside fitted new painted wings, they are from a...
Hi Pascal That looks like a good setup, it has given me some more ideas. and I will be making something similiar, I take it then that the u parts on the dexta steering arms were not large enough to go around the major axle. I wonder if the steering arms off a ferguson t 20 or a massey ferguson 35 w...
Hi Pascal You are making great progress! I thought your engine was with problems and in bits and then I see a picture of it fitted in your tractor. Good work!! Can you show me a picture of the bottom of the bellhousing, I guess your engine all bolts fit. I guess both our tractors will be completed a...
Hi Pascal That looks like a good setup, it has given me some more ideas. and I will be making something similiar, I take it then that the u parts on the dexta steering arms were not large enough to go around the major axle. I wonder if the steering arms off a ferguson t 20 or a massey ferguson 35 wo...
Hello again I obtained this new air filter last night, it is not intended for a tractor but why not ! :) Its quite large in size and comes in a very similiar blue colour, i hope to be able to fit in next to the battery as i dont really want to cut a hole in the bonnet and stick it up and out. We wil...
Pictures as promised Side rails on - Ive next got to remove the A frame from the front axle, so then i can fit the front axle to the side rails, then i can measure how much longer the A frame needs to be http://sites.google.com/site/fergusont20/_/rsrc/1273270198760/pug/2rails.JPG Pictures shows clea...
:thumbs: http://motoren.ath.cx/download.php?filename=ford/Ford_2710.pdf http://motoren.ath.cx/download.php?filename=ford/Ford_2700_parts.pdf http://bf494.co.uk/assets/Ford_Lehman.pdf Does anyone have a link to a full english version of ford 2710 link above? Would really like to read it, thanks Mark
Kim Here are the pictures as promised The master cylinder for each wheel, http://i207.photobucket.com/albums/bb172/Kiwi_Kev/IMG_1240.jpg and the slave cylinder inside the drum http://i207.photobucket.com/albums/bb172/Kiwi_Kev/IMG_1243.jpg Hope this helps you, and will not upset too many other peopl...
yes, if i put the filter facing upwards the oil will be flowing through the filter the other way, so if there was lots of debris etc on the filter i would in theory blow all that debris back around the engine. It would be interesting to see what would happen if i put a new filter in and tried it, wo...
Did a few more jobs on the tractor yesterday :D forgot to take some pictures so will take some later in week Both new siderails are fitted, the large oil filter housing in its original position would of required me to take practically all of the metal away on the lip of the new side rail, both top a...
Mark, Start your new thread on here as it will keep 6 cylinder engine related subjects together for the moment. If you are going to write a story on how you do it, put it and pictures on the Wiki and keep just comments and questions on the board. Don't put it with the Major subjects as it is not a ...
thanks Pascal, time is my only constraint. Looking forward to hearing it running, then doing some work with it, be nice if I can get it done and get the mower conditioner behind it, if we have a heavy crop again that will make the tractor roar and hopefully it will sound beautiful For anyone who is ...
Update: For anyone who has not read my posts in the 590E thread. I purchased this engine last week, i believe it is a 2700 series industrial engine, i dont yet know the exact model number. It was a local engine, which was running in a major the week before i purchased it http://sites.google.com/site...
Hi mark, Congrats with your new engine, I have the same series engine, but I have a different exhaust and air inlet manifold. Does your injection pump has a connection for a rpm cable? Regards, Arno Hi I will look to see if there is a tacho take off on pump, do u have any more info on these series ...
Ive brought an engine for my major, can anyone give me anymore detail about it http://sites.google.com/site/fergusont20/pug/DSCF0527.JPG http://sites.google.com/site/fergusont20/pug/DSCF0525.JPG Stamped on the block just above the sump, manifold side: http://sites.google.com/site/fergusont20/pug/DSC...
Im going to look at a 590E engine in a couple of hours time, i will let you know how i get on, the owner tells me it is a late 590e and that the injector pump is externally driven but different to the earlier ones, i wont know untill i see it. does this sound viable??
Hi fergusont20, just a thought,but those two 590e engines you saw at the breakers yard that you say are to far gone.If nothing else is available, is there any chance that you could aquire both engines,( at the "right" price) dismantle both and rebuild one good engine from the two? I've heard storie...
Hi Fergusont20, What a shame to see such 590E's rusting away... :cry: I hope you will find a good engine. Thanks Pascal I too hope i can find a good engine, normally sourcing items is not too difficult but struggling with this engine, i have many people on the lookout for me so fingers crossed. The...
http://sites.google.com/site/fergusont20/_/rsrc/1269427963840/pug/gasket.JPG Sorry for all the questions, im 28 years old and if i dont ask alot of questions i dont learn :D I just found the above picture on a gasket website , it lists the 590e as a d series engine, does this mean these 590e engine...
I went to look at that commercial breakers yard yesterday, 1000's of trucks and 1000's of various makes of engines all exposed to the elements :( I found two 590e but they were too far gone, been standing outside for many many years, why o why were they not put under cover. What a waste ! If i had w...
Following on my thread in the major forum about me wanting to put a 6 cylinder turbo engine in my recently acquired major. I have been doing alot of thinking about this and i have decided to try and source a 590e engine for it, i know these dont have turbo's but echoeing what alot of older and wiser...