The Fordson Tractor Pages Forum

sent for the cavalry! mate who is a fitter, thinks after getting the unit off, could be the gasket so ordered one along with a new seal kit,we will try this first

can you remove the retainer without taking the unit off the tractor?

Thanks Mathias, however this is the first time my tractor has moved in nine months and I am desperate for some fun

I see it's the same problem as Terry 274 , hopefully the answer will come up on his or my site

just found out, it's where the flow control valve is housed

Help! Due to ill health tractor not moved for nine months. Now started once again and there is a bad oil leak at the services it is just above the end of the qualtroll lever, it's the opening with the pin in it. Never done this kind of thing before, can anyone help with advice?

HI John, ten years ago I remember saying to myself "that's it, won't need much else!" don't kid yourself, it's never ending

I solved wheel wobble same way as Jerry

helicoil has worked perfectly

sent it back. a mate got a helicoil kit and put a new thread and bolt in it, happy days are here again

just received a new fuel filter housing and bowl. it's different, in and out are at either ends so will have to get a new pipe made for one of them.
apart from that, it has no bleeders,can anybody tell me is this ok and will it work alright.thanks in anticipation

due to various things, i've been missing from the forum. Tried a number of times to get in, all to no avail. Thanks to help from Mathais i'm now back. due to heart trouble, my super dexta never moved from June last year til now. Charged battery but just a clunk when trying to start, tried jump leads...

I have used POR in two tanks in the last ten years with 100% success

I went to the local Pirtek store, they made one from flexi pipe there and then

be carefull! there are two different sizes of threads for the oil pressure switch

the heater button goes below the horn button

same model as mine, holes in one rear wheel and not the other

It's the same model as mine, holes in one rear wheel but not the other

you are spot on Ian. Been 5 years now no probs

just looked at the view topic, after renovation, I never refitted the small brackets and again no problems

There's a bracket at the filler cap fixed to the nosecone.
I've no cowl and topped grass often with no problems

20/30 oil fine for all.
when I restored my baby, the clutch was siezed, tried constant press and release, all that happened was the main drive plate was ripped to bits, so a clutch rebuild was required

I made a spacer to fit on the wing behind the bracket and it works perfectly

thanks Brian, I thought so. The large screws wired and locknuts on them I assume

my baby is running too fast at idle, silly me, how do i slow idle speed down ?