The Fordson Tractor Pages Forum

If any of you have ever had to rebuild a block that has been lined bored to .015 oversize O.D. main bearings you will have little choices for repair, and the norm is to get a replacement block because oversize O.D. bearings are harder to find than hens teeth. (Do not confuse these with the normal un...

Hi guys, thanks for the compliments! JC , no rush. We got the flu bug going around this weekend so I haven’t been out in the shop since last week, but I did get the power steering pump back together and on, also got all the wrinkles ironed out of the front cowling as well as the correct headlights a...

Couldn’t stand it any longer, I just had to go play for a little while.

Thanks JC!

OK we finaly got it! Go to ImageShack, upload a file/image of your toy, below your uploaded picture you will see a (Direct Link), left click on the link to highlite it, then right click and copy the link, now go back to to the post you are working in and just below the subject box you will see a thu...

Be damned if I can figure out how to post pics.

JC, can I get a copy of your County owners manual, brian got me the manual for the roadless but I havent been able to find anything for the county.

Pat

http://img27.imageshack.us/img27/5319/006ha.jpg
OK trying to figure out how to post pics.

OK, my turn to share a few stories about engines running away. A friend was pulling in competition with his JD, someone told him he needed to run the engine looser by removing a bunch of the rings from the pistons, it sucked oil out of the crankcase and took off , he got it shutdown quickly by slapp...

Thanks JC that’s exactly what I needed, however Brian has graciously offered to get me what he has on disk…… I wish my wife was this nice! OK, I guess it’s about time I fessed up and let you all know how sick and twisted I really am. Ill try to post some pics as evidence, we’ll see how it goes for t...

Hi JC, is the manual for a county on rubber or tracks?

Pat

Thanks Kjetil! now I just need to find somthing for the County's

Pat

Anyone have mauals they can scan for the Roadless and the County super 4? I have the parts list for the Super 4 & 6, March 1965, 36 pages, and I am more than happy to scan this to share with anyone that needs it. Anyone have a spare (County Super 4) front weight, Stop snickering.....ya never know! Pat

My County is a 7-63 and my Super is a 12-63, both units have Enfo stamped in the fenders.

Pat

Lazy T I’m not sure if anyone has gone through this properly yet, your problem sounds plain and simple to be injector or injector pump problems. Start it up, crack loose and then tighten each injector line one at a time keeping body parts clear of the fuel squirting out. You should hear a noticeable...

Bob, I just went out and measured the O.D. of the original oil lines and found it to be .280, this will not adapt to any standard fittings over here. Unless your concerned with having your Major look stock, do yourself a favor and install a new gauge and all.

Pat

Bob, sorry for the kick in the gonads, but if the soldering job on the banjo fitting is your handy work you may be better off replacing the line. You can cut a short piece of the original line with the fitting on it (using a tubing cutter) that attaches to the back of the dash as this is a oddball f...

Does anyone know where I can get .015 oversize O.D. main bearings for a major block that has been line bored? I have two cranks to pick from a .020 under and a standard grind.
cam bearings would be nice as well but I can live with the ones that are in it.

Thanks.

Pat