The Fordson Tractor Pages Forum

blue32

Yeaaah, That is Norway just befor christmass...fantastic

m

blue32

Thank you all for nice comment,s :D - (the swandri guy)-yes, I think you will also get your dexta even nicer if you want... Yes Ben it is a better simplier and good pickup hitch, as Magne Olav says too, I think better then the "threepoint pickup" hitch for the old fergies. It is also good and steady...

blue32

It start snowing yesterday, so I decided to run a trip on the slippy snow with my litle blu, for to pick up my mail from the mailbox. :D :) http://i1142.photobucket.com/albums/n620/blue472/061.jpg http://i1142.photobucket.com/albums/n620/blue472/060.jpg http://i1142.photobucket.com/albums/n620/blue4...

blue32

The hydrulic will not work with me, but it work against me ;) I have a front loader and now a snow blade in the rear. I set the control leaver in horizontal position, and the rear blade lift only half way up. If I set it in vertical position it don't move at all, but if i puch the leaver against th...

blue32

And here is the tractor to my youngest brother, he got it when it was neerest a wreck... but he has now got the engine running, split and repaired the dual clutch, and mybee he will start some moore resto at the litle tractor too... I hope. :) :) http://i1142.photobucket.com/albums/n620/blue472/001-...

blue32

Hi all, At what pressure should the oil warning light go on/off? I think the sensor on mines had it so just want to check with a guage. Hope its not the mains! Also what pressures can I expect warm? 40psi tick over? 60 full revs? Cheers. Sins Dexta did,nt have any pressuregauge you have to mount so...

blue32

Hi K...D... your blue is almost similar to my 1962, nice, and seems very good cond.

mikkel

blue32

Well - I installed the new radiator today - and it's a little different to the original - It seems to be about 10mm narrower, and the bolt holes on the bottom are a fraction closer together and the whole radiator sits slightly to the right (from the driver's perspective). It screwed into the chassi...

blue32

Wooow

Roadless is king of all tractor,s, ---- Supert Magne Olav, denne er unik.

mikkel

blue32

Hi, I recomend that you can take a wooden chisel about 12 mm wide and knock stright between the cast iron and around the brass edge as I,ve tryed to show in color...

mikkel

blue32

This "black and blue fellow" I,d handed ove to a lad in my neighbourcommunity, who had a friend who also had one Dexta restoring for some time ago. It has live drive and I,d rapaired the footplate - exos - welded some hole in the fenders, and the front loadframe on it. Hope they can have many good t...

blue32

Hi "My Dexta" - as all others old dexta,s is this known for most of them, in Norway I think one Dexta like your,s probably would cost abit less I think, but as I have seen in english marked or so, I think the price was fair, and as I think in N.l. even moore? It also depend of how many houres and ho...

blue32

Hi B.C. has your dexta had waterewast insides gearbox or transm..? Did you look for damage from bering,s in the old oil?
mikkkel

blue32

Hi john, I did this change of this two oilseals when I repaired a dualclutch at my 1960 Dexta some years ago. when oil is started to leak into clutch and bellhouse, it is best to change all this seals from engine and splines when tractor is splitted. you have to disamble the thrustbearing and two sp...

blue32

Good idea Tom, nice top you are making on your S.D. I wonder; did this liftlock for the hydraulik sit on new Dextas from Dagenham?? http://i1142.photobucket.com/albums/n620/blue472/010.jpg and here is a better picture of the litle winch at my brother,s Dexta. http://i1142.photobucket.com/albums/n620...

blue32

Today it arriwed my second set of halftrack, and it was only alitle surface-rusty on it, this set is,nt run more than mybee 50 houres, and every parts was there, (so for now I also can put the first set on my "57 goldfish" in the future, I think), and with new tires and Ford grey color on, I think i...

blue32

Hi blue32 - I have done some reading on the axle seals - and it sounds rather involved. I'm pretty good with my hands but mechanical repairs are fairly new to me. Do I need any special tools to do this job or is this something I can do with standard spanners, torq wrench, hammer, screwdrivers, that...

blue32

I can show a picture of the links at my Dexta, who was brake down at the start here, and I,d made a new link system of two pice of some old braketube,s and steelpin who fit insides the tubes. and whit a spring...it work good together with the handthrotle and footpedal then. http://i1142.photobucket....

blue32

Well - probably no surprise - but I gave the cooling system a flush with a cleaning product on the weekend and water started spewing out the radiator. So, I just ordered a new radiator! It seems that the pump and thermostat are working okay though - so hopefully with a new radiator and hoses i'll f...

blue32

Thanks for answering that question, ive still got to have a fiddle with the hydraulics because last time i tried the linkage in position control, the linkage worked and stayed up etc, but it wouldnt work all the time and i had to push the quadrant right to the top to get it to move!! something tell...

blue32

Hi, According to my book, the longer gearstick with plastic top came in 1960 (957E62654-), of course maybe diffent for Norway. It seems the secondary gearstick knob was again changed in 1962 from serial # 09B704134 on, to a threaded screw type black knob instead of the spring clip type. (From Servi...

blue32

Lesfen wrote:
Nick wrote: And the other bigger one, this is for selecting external services? Does this push in and out or screw?

Nick,
If no one has answered this>>
The bigger knob pushes/pulls in and out. -Hi Les and other,s sorry for not seeing that Q, but yes it is push and pull knob. - mikkkel

Les

blue32

i agree mate we all need a tractor or 3 :beer: do all you're ( export ) dexta s have a foot thottle fitted , never noticed one before on a fordson? - Hi Tom, I am not sure of this about that the throtle footpedal is OG from Dagenham ??, but when the tractor,s was deliver,ed from the main importer i...

blue32

Hi, W... I,d bought all new orings from Agril. ltd. and I,d cleaned the hole system with the complet heavy parts... standing on a selfmade tool on my workbench. Look,d good on Stefan,s site, and after cleaning up everything as good as possible, I was happy when my hydraulik did work perfect after as...

blue32

Hi Ben... ok, about the nose con... I,ve learned something new today too,

and no...I am not on MF forum... my biggest tractorinteress is Fordson Dexta,s ha ha.

How about you ? send some photos of your,s Dexta,s?? it is my hobby to look at Dextapictures.

mikkel

The Fordson Tractor Pages Forum

Search found 155 matches

Re: My tractor`s

Re: My tractor`s

Re: My tractor`s

Re: I thought I had no problems, but so wrong was I

Re: My tractor`s

Re: Oil Pressure

Re: Show us your Fordson Dexta

Re: Hi, I'm new here

Re: Show us your Fordson Dexta

Re: Replacing Thermostat

Re: Show us your Fordson Dexta

Re: New 1962 Dexta Purchase

Re: gearbox noise

Re: Oil in Clutch Housing

Re: Show us your Fordson Dexta

Re: My tractor`s

Re: Hi, I'm new here

Re: My tractor`s

Re: Hi, I'm new here

Re: My tractor`s

Re: My tractor`s

Re: My tractor`s

Re: My tractor`s

Re: Hydraulic rebuild kit

Re: My tractor`s