removal of cast wheels

This forum is about the Fordson F, N and E27N Major.
Post Reply
am333rcr
Not Quite Blue Yet
Posts: 6
Joined: Tue Jul 03, 2012 10:34 pm

removal of cast wheels

Post by am333rcr »

hi

new to the forum have been watching for a while.

so i have fordson with the 4 spoke cast wheels.
i want to put ti wheels on it

so can i just put new hubs on or will the stub axle be required aswell?

thanks in advance

Emiel
True Blue
Posts: 614
Joined: Wed Apr 16, 2008 3:22 pm
Location: Netherlands

Re: removal of cast wheels

Post by Emiel »

Hi,

Only the hubs abs bearings should be changed. Stub axle is the same. Bearings are same dimensions as well.
Best regards

Emiel

N 1937, E27N 1948, 8N 1949, E27N 1950, E1A Diesel 1953, E1ADKN PP 1956, Dexta 1959, NH Clayson M103 1964

am333rcr
Not Quite Blue Yet
Posts: 6
Joined: Tue Jul 03, 2012 10:34 pm

Re: removal of cast wheels

Post by am333rcr »

hi

thats what i thought. i can get the whole axle if required

cheers
alistair

Billy26F5
True Blue
Posts: 1262
Joined: Fri Jun 26, 2020 12:01 am
Location: On Billy

Re: removal of cast wheels

Post by Billy26F5 »

If you want pressed wheels you must fit weights, as you'll lose front end weight essential for pulling heavy loads. Otherwise just as Emiel says.
Sandy
ImageImageImage

Post Reply