Fordson ID - you all missed one out
Posted: Wed Aug 05, 2009 7:30 am
At the end of Cork production, a few hundred N's were assembled in the Ford plant at Old Trafford in Manchester, England before the production line at Dagenham was operational.
These were basically a water washer N with surplus Cork parts.
The mudguards had a single rib narrow top [wider than the WW2 green N].
There was only one bolt attaching the seat spring to the rear axle - the U shaped 2nd locator did not come in until the blue Dagengam N's were produced
The radiator cap was shallow pressed tin. Drag link & starting handle were thin. The fuel tank end had the same wording as the Cork model. The patent wording on the fuel tank support gave different details to the grey & the dark blue models
High top gear & cleated rear wheels. German Bosch magneto.
Colour was LIGHT BLUE
Only a few survive to-day, Stuart Gibbard did own one in original condition which was featured in magazine articles and his book.
These were basically a water washer N with surplus Cork parts.
The mudguards had a single rib narrow top [wider than the WW2 green N].
There was only one bolt attaching the seat spring to the rear axle - the U shaped 2nd locator did not come in until the blue Dagengam N's were produced
The radiator cap was shallow pressed tin. Drag link & starting handle were thin. The fuel tank end had the same wording as the Cork model. The patent wording on the fuel tank support gave different details to the grey & the dark blue models
High top gear & cleated rear wheels. German Bosch magneto.
Colour was LIGHT BLUE
Only a few survive to-day, Stuart Gibbard did own one in original condition which was featured in magazine articles and his book.