fordson e27n plug gap and starting
Posted: Sun Jun 13, 2010 2:41 pm
does any body no the correct plug gap size on the e27n and the correct way to start the tractor mine starts different every time i go to it
Hi Keith,
plug gap is 0.030 -0.033"
- download the user manual (this site, first page) it's in there.
Mine starts best like this (on the handle, no electrics):
Fuel on, full choke, governer on 3rd notch. turn over 2-4 times or until it fires. Then reduce to 1/2 choke, will normally start on 1 or 2 swings. Few minutes warm up and loose the choke.
Tim