Engine Oil

This forum is about the Fordson F, N and E27N Major.
Peter L
Not Quite Blue Yet
Posts: 13
Joined: Sat Sep 21, 2019 10:30 pm
Location: Mid-Wales

Re: Engine Oil

Post by Peter L »

Hi I'm newby and just bought myself a Major (1958) and I think I need to change the oil. The oil in the gearbox is a distinctly milky colour (at least that on the dip stick). I see the recommendation is 20W/50 multigrade for engine, gearbox and back end and I found a company called rye oil that seem to do oil at a reasonable price. Has anyone else used them? They do a "Classic 20w50 Engine Oil – High Zinc" (see www.ryeoil.co.uk/shop)

Also would it be wise to use the old oil from the engine to "flush" out the gearbox before I put some new oil in. I'm thinking do the engine first (oil in the engine looks good just old) and then drain gearbox and fill with the old engine oil (perhaps after straining it) and use this to absorb some of the left over custard in the gearbox and drain off? I've yet to look at the rear end but I suspect it needs changing as well.

Peter

henk
Site Governance Team & Expert Team
Site Governance Team & Expert Team
Posts: 2069
Joined: Wed Apr 16, 2008 8:56 pm
Location: Arnemuiden, The Netherlands
Contact:

Re: Engine Oil

Post by henk »

Peter L,

Welcom.
Could you please start a new topic with the same text at the major forum. Thats the correct place.
Kind regards, Henk

Fordson New Major February 1957 Mark I

Peter L
Not Quite Blue Yet
Posts: 13
Joined: Sat Sep 21, 2019 10:30 pm
Location: Mid-Wales

Re: Engine Oil

Post by Peter L »

henk wrote:Could you please start a new topic with the same text at the major forum. Thats the correct place.
Sorry, Ok well do

henk
Site Governance Team & Expert Team
Site Governance Team & Expert Team
Posts: 2069
Joined: Wed Apr 16, 2008 8:56 pm
Location: Arnemuiden, The Netherlands
Contact:

Re: Engine Oil

Post by henk »

Thanks
Kind regards, Henk

Fordson New Major February 1957 Mark I

Everne
Not Quite Blue Yet
Posts: 1
Joined: Fri Oct 09, 2020 2:52 pm

Re: Engine Oil

Post by Everne »

It is good thing to get it in hand easily

Post Reply