Page 1 of 1
e27n positive earth?
Posted: Sat Jan 04, 2014 10:11 pm
by scoobyjim
Im on wiring my p6 up and seem to remember that they were positive earths. Is.this correct?. What difference will negative earth give.
Thanks
Re: e27n positive earth?
Posted: Sun Jan 05, 2014 2:56 pm
by Dandy Dave
The only thing that may be a problem is the charging system. Everything else will work. Sometimes if you polarize the dyno. and regulator/ cut out, all will work anyway in either direction that it is polarized to work. Look in your manual, and the polarity should be in the wiring diagram. Dandy Dave!
Re: e27n positive earth?
Posted: Sun Jan 05, 2014 9:43 pm
by scoobyjim
Yeh i knew i had a manual somewhere. Found it today and it is positive earth.
Just waiting for a new regulator to arrive and all should be well.
Re: e27n positive earth?
Posted: Mon Jan 06, 2014 8:15 pm
by Jerry Coles
Just to be sure I would flash the dynamo to re-energise the magnetism.
Jerry
Re: e27n positive earth?
Posted: Tue Jan 07, 2014 7:07 pm
by scoobyjim
By putting a negative on both tetminals?
Re: e27n positive earth?
Posted: Tue Jan 07, 2014 9:37 pm
by Dandy Dave
Not sure what you have for a regulator. Most systems are polarized by flashing a wire from BAT (Battery) terminal to a F (field) terminal. Dandy Dave!