Hi there, I'm trying to find the point to drain my 4D mk1 cooling system. Is there a nut on the block somewhere? I haven't found it yet.
Also, I'm after a 50/50 anti-freeze mix, does anyone know the capacity of the cooling system? will 10 Litres of anti-freeze be enough?
many thanks
Ed
drain nut for cooling system?
-
oehrick
- Site Governance Team
- Posts: 1239
- Joined: Wed Jan 29, 2014 2:41 am
- Location: Norfolk Broads UK
Re: drain nut for cooling system?
Hi Ed
in a E27N or E1A Major ??
If E1A (the next topic down would be better for you) Capacity is 3 galls (UK not US) IIRC about 14 Litres and mine has a block drain tap just under / behind the Dynamo and a Rad drain tap under the RH side looking into the front (take the RH grille out, its easier to see)
HTH and the taps are not seized solid
in a E27N or E1A Major ??
If E1A (the next topic down would be better for you) Capacity is 3 galls (UK not US) IIRC about 14 Litres and mine has a block drain tap just under / behind the Dynamo and a Rad drain tap under the RH side looking into the front (take the RH grille out, its easier to see)
HTH and the taps are not seized solid
Best regards
Rick - Bogside on Bure
1958 Diesel E1A Mk2 s/n 1470165 - still in working clothes
Rick - Bogside on Bure
1958 Diesel E1A Mk2 s/n 1470165 - still in working clothes