E27n Generator
Posted: Thu Apr 30, 2015 1:39 pm
I'm sure it has been asked before...how to polarize the Lucas generator on my tractor.
The Fordson Tractor Pages Forum
www.fordsontractorpages.nl
https://www.fordsontractorpages.nl/phpbb3/
E27n Generator
https://www.fordsontractorpages.nl/phpbb3/viewtopic.php?f=1&t=6459
Page 1 of 1
Re: E27n Generator
Posted: Thu Apr 30, 2015 5:22 pm
Take the gen off, or take off the fan belt, remove leads from the gen, and then with a pair of jump leads Negative on the big connector (D) on gen, and then just touch the body of the gen with the Positive lead for a few seconds (no longer)
Re: E27n Generator
Posted: Sat May 02, 2015 3:44 am
I'm sure you don't need to disconnect anything.
Just a jumper between BAT and Field at the regulator will do. Our E27ns are positive earth, but that's all covered at the regulator terminals.
An internet search will provide hours of confusion... but worth the trip.
Just a jumper between BAT and Field at the regulator will do. Our E27ns are positive earth, but that's all covered at the regulator terminals.
An internet search will provide hours of confusion... but worth the trip.
Re: E27n Generator
Posted: Sat May 02, 2015 2:33 pm
Thanks for your replies.
Will get at it tomorrow.
Will get at it tomorrow.