Hydraulic pressure tap on single lever lift?

This forum is about the Fordson F, N and E27N Major.
Post Reply
CalGG
True Blue
Posts: 83
Joined: Thu Oct 11, 2012 2:44 am

Hydraulic pressure tap on single lever lift?

Post by CalGG »

Have any of you done anything with this feature?

I can imagine a dump trailer, after chaining down the lift arms.

Any calls on the pressure and flow rate (both ways)?

TIA

Cal

ETA E27n

super6954
True Blue
Posts: 781
Joined: Sun Jul 06, 2008 8:21 pm
Location: Manitoba,Canada

Re: Hydraulic pressure tap on single lever lift?

Post by super6954 »

Hi Cal
Can't help you with pressure and flow but somebody added a double acting spool on my p6, what they used it for I have no idea either :( . It takes pressure from the tip port and returns it to the plug at the back. I would think to do anything sensible with a tipping trailer you would be needing an extra tank, like they had fitted for a loader :idea: . I think there would be a shortage of oil in that housing ,it's not that big of a capacity from what I can see :scratchhead: .
Regards Robert
A Fordson is for life not just for Christmas !.

brockwood
True Blue
Posts: 141
Joined: Fri Apr 08, 2011 2:25 pm
Location: vic australia
Contact:

Re: Hydraulic pressure tap on single lever lift?

Post by brockwood »

http://www.fordsontractorpages.nl/phpbb ... 272#p32272
http://www.fordsontractorpages.nl/phpbb ... 309#p26309 heres a couple of old posts . currantly runing a mm cub dozer single acting on the halftrack 3 imp gallons a min at 1700
1x 23f 1x 34 blue n 1 x 44 green n e27/s x 8 3ooo/ 5000 slectospeed county 754 x1 ford k series truck

Post Reply