E27N Petrol/TVO flywheel removal

This forum is about the Fordson F, N and E27N Major.
Post Reply
Lister Boy
Not Quite Blue Yet
Posts: 5
Joined: Wed Jul 11, 2012 3:22 pm

E27N Petrol/TVO flywheel removal

Post by Lister Boy »

Hi,
I have a E27N pet/TVO engine lying on its side on my garage floor as I needed to remove the clutch and flywheel for a conversion. Removing the clutch is fine; clearly though the flywheel is retained by six pull in bolts and nuts from the engine side.
The question is can I undo these 6 by accessing through the sump cover plate (some 10" square) or do I have to remove the sump?
Please only answer if you have done this I don't need six wooly answers that are not useful provided by someone with more time than knowledge.
Thanks Mike

Emiel
True Blue
Posts: 729
Joined: Wed Apr 16, 2008 3:22 pm
Location: Netherlands

Re: E27N Petrol/TVO flywheel removal

Post by Emiel »

Hi,

You need to remove the sump.

What are you converting then?

Rgds
Emiel
Best regards

Emiel

N 1937, E27N 1948, 8N 1949, E27N 1950, E1A Diesel 1953, E1ADKN PP 1956, Dexta 1959, NH Clayson M103 1964

Post Reply