E27N Petrol/TVO flywheel removal
Posted: Sat Mar 24, 2018 11:00 am
Hi,
I have a E27N pet/TVO engine lying on its side on my garage floor as I needed to remove the clutch and flywheel for a conversion. Removing the clutch is fine; clearly though the flywheel is retained by six pull in bolts and nuts from the engine side.
The question is can I undo these 6 by accessing through the sump cover plate (some 10" square) or do I have to remove the sump?
Please only answer if you have done this I don't need six wooly answers that are not useful provided by someone with more time than knowledge.
Thanks Mike
I have a E27N pet/TVO engine lying on its side on my garage floor as I needed to remove the clutch and flywheel for a conversion. Removing the clutch is fine; clearly though the flywheel is retained by six pull in bolts and nuts from the engine side.
The question is can I undo these 6 by accessing through the sump cover plate (some 10" square) or do I have to remove the sump?
Please only answer if you have done this I don't need six wooly answers that are not useful provided by someone with more time than knowledge.
Thanks Mike