hi
new to the forum have been watching for a while.
so i have fordson with the 4 spoke cast wheels.
i want to put ti wheels on it
so can i just put new hubs on or will the stub axle be required aswell?
thanks in advance
removal of cast wheels
Re: removal of cast wheels
Hi,
Only the hubs abs bearings should be changed. Stub axle is the same. Bearings are same dimensions as well.
Only the hubs abs bearings should be changed. Stub axle is the same. Bearings are same dimensions as well.
Best regards
Emiel
N 1937, E27N 1948, 8N 1949, E27N 1950, E1A Diesel 1953, E1ADKN PP 1956, Dexta 1959, NH Clayson M103 1964
Emiel
N 1937, E27N 1948, 8N 1949, E27N 1950, E1A Diesel 1953, E1ADKN PP 1956, Dexta 1959, NH Clayson M103 1964
Re: removal of cast wheels
hi
thats what i thought. i can get the whole axle if required
cheers
alistair
thats what i thought. i can get the whole axle if required
cheers
alistair
Re: removal of cast wheels
If you want pressed wheels you must fit weights, as you'll lose front end weight essential for pulling heavy loads. Otherwise just as Emiel says.
Sandy
Sandy