fordson major parts
-
- True Blue
- Posts: 62
- Joined: Sun Dec 26, 2010 1:15 pm
- Location: sheffield
fordson major parts
hey were are the best place too get new parts from for a major
Re: fordson major parts
I have been using agriline and have been pleased with the parts and the service
Andy
Andy
Re: fordson major parts
Hello Nathan. I have had good luck with Agriline and also the New Holland site. The New Holland site has a full parts list and it will tell you if the part is still in service. Good luck.
Gman: 1959 Power Major
-
- True Blue
- Posts: 148
- Joined: Fri Mar 12, 2010 8:40 pm
- Location: Yorkshire
Re: fordson major parts
Hi fella, IMO it can depend on what parts you need, Agriline sure do have a good many parts, and swift delivery, but you can find many new and used parts on ebay. Another place is Emmark at Pudsey, about 40 miles from Sheff, i found them very good (and you can ask for a discount) , It's what your happy with that really counts. Jimnathanwhittaker wrote:hey were are the best place too get new parts from for a major
Fordson Dexta, Barn Door Technology at it's best.
-
- True Blue
- Posts: 62
- Joined: Sun Dec 26, 2010 1:15 pm
- Location: sheffield
Re: fordson major parts
Thanks all but my engine is out of a combine so the throttle setup is different I have been told so think I might have too change the whole thing
-
- True Blue
- Posts: 101
- Joined: Mon Sep 06, 2010 11:09 pm
- Location: Alkborough, North Lincolnshire U.K.
Re: fordson major parts
Does your engine have the throttle cross shaft that goes through the block?nathanwhittaker wrote:Thanks all but my engine is out of a combine so the throttle setup is different I have been told so think I might have too change the whole thing
JB... So what if I am having a mid life crisis, It's only hurting my bank balance
1957 Fordson Major Diesel - 1951 Ferguson TED 20 - Massey Ferguson Type 794 Plough
1957 Fordson Major Diesel - 1951 Ferguson TED 20 - Massey Ferguson Type 794 Plough
-
- True Blue
- Posts: 62
- Joined: Sun Dec 26, 2010 1:15 pm
- Location: sheffield
Re: fordson major parts
hi sorry about the late reply. yeah it does go thru the block but it the inlet manifold what has a diffferent set up