Lift arm compatibility

[will c]

Hi I was wondering what lift arms would also fit a super major.
Are the dexta or 1000 series lift arms the same? or were the cross shafts different?
The reason I ask is I am after some lift arms with the extra hole for a PUH

Thanks in advance

Will

[Brian]

None of the lift arms are compatible with a Super.

[Roadless63]

I'm afraid you are after the holy grail, I am not aware of anything else that will fit. I have seen folk asking up to £300 - £400 for a pair of these. Trouble is the splines wear so many s/h ones are next to u/s. One of mine had bad splines, I got hold of a decent normal super lift arm and was going to get the centers machined to re-spline to pick up hitch arm. Since then a guy on ebay has been listing some repro arms for £200/pair so I bit the bullet and bought a pair. They look good but haven't tried them yet.
Happy hunting!

[will c]

I feared that may be the case

So my search will continue, if not maybe I could manufacture a pair by welding the extra lug on with dissimilar rods then drill it out,

Has anyone done this before???

[super6954]

Hi There was somebody on here maybe middle of last year that was making his own pickup hitch top arm But can't remember who He had some pictures of it to I think. Maybe try a search of the forum and see what comes up .
Regards Robert

[super6954]

Hi There was somebody on here maybe middle of last year that was making his own pickup hitch top arm But can't remember who He had some pictures of it to I think. Maybe try a search of the forum and see what comes up .
Regards Robert

I feared that may be the case

So my search will continue, if not maybe I could manufacture a pair by welding the extra lug on with dissimilar rods then drill it out,

Has anyone done this before???

Hi I just did a search for some of brians wisdom on another topic and found what you needed too The post is in the parts swap forum on page 2 headed Wanted Super Major lift arm for pick up hitch , The guy that made one is Matt 1944 N and the picture is there Maybe send him a message and see how it worked out .
Regards Robert

[will c]

Thanks

I assume you mean this one :
http://www.fordsontractorpages.nl/phpbb ... tch#p22863

I also found this one :
http://www.fordsontractorpages.nl/phpbb ... hp?p=14716

Thanks for all your help

Will

[super6954]

Yes will that's the one I forgot about the other one i posted in that to at one point so you got all the info now that you need so good luck with it and hopefully we can help you again sometime, all the info is here someplace you just have to find it or the guys that know about it if not in a topic already. .
Regards Robert