Page 1 of 1
super major hydraulic top
Posted: Wed Dec 09, 2009 9:20 pm
by tmc
Hi , I printed the instructions for setting up the hydraulic top , I
printed this photo from an earlier post,
http://i288.photobucket.com/albums/ll17 ... 302583.jpg
as soon as I looked at my top it was obvious one top was wrong,
the left hand spring in Matt's photo is underneath and in mine its on top.
can you tell me which is correct ?
I have no idea why my photo is loading ok but Matts is a link when
the address's look the same ?
Re: super major hydraulic top
Posted: Wed Dec 09, 2009 11:50 pm
by John
tmc wrote:I have no idea why my photo is loading ok but Matts is a link when
the address's look the same ?
The top link has simply been typed without brackets and therefore is a simple url link.
The photo underneath displayed because the web address was enclosed in [img]...[/img] brackets.
Posted: Thu Dec 10, 2009 8:26 am
by Brian
Two different tractors. One picture is of a New Performance Super the other is a basic Super. Yours is the basic one with no drop control on the front of the ram cylinder.
Make sure you use the correct set-up procedure.
Posted: Thu Dec 10, 2009 11:03 am
by tmc
Brian wrote:Two different tractors. One picture is of a New Performance Super the other is a basic Super. Yours is the basic one with no drop control on the front of the ram cylinder.
Make sure you use the correct set-up procedure.
Thanks yet again Brian .
Re: super major hydraulic top
Posted: Fri Dec 11, 2009 6:26 pm
by essex pete
John wrote:tmc wrote:I have no idea why my photo is loading ok but Matts is a link when
the address's looThe top link has simply been typed without brackets and therefore is a simple url k the same ?
link.
The photo underneath displayed because the web address was enclosed in [img]...[/img] brackets.
That can be very confusing on a tractor forum
