Starter Switch

icom102 · Post by **icom102** » Sun Sep 12, 2010 4:48 pm

ok so how do i tell what the engine is from then that first page wont open needs a user name and pass word

henk · Post by **henk** » Sun Sep 12, 2010 5:45 pm

The name of the site and password the name of Brian his petrol Dexta: dotty

icom102 · Post by **icom102** » Sun Sep 12, 2010 5:51 pm

i am lost now:(

henk · Post by **henk** » Sun Sep 12, 2010 6:40 pm

To open the wikki, username: fordsontractorpages and password dotty.
Try again.

icom102 · Post by **icom102** » Sun Sep 12, 2010 6:46 pm

cheers yea thats the place i got the code on the engine so how can i find out what kind of tractor the engine is from ?

henk · Post by **henk** » Sun Sep 12, 2010 7:07 pm

Did you read the topic on the second link I gave you? That should give you a bid of a clou.
I do not know were that number comes from.

Nick · Post by **Nick** » Sun Sep 12, 2010 10:10 pm

the engine on my major is very similar to yours, giving it starts with 500E. Mines number is 500E36938, these aparently are engines out of the thames trucks (basicly the same i think), the difference is that they rev a bit higher.

JC · Post by JC » Mon Sep 13, 2010 6:19 am

Maybe StevenB, who has Thames Trader trucks coming out of his ears

, can shed some light on this one.

Steven B · Post by **Steven B** » Mon Sep 13, 2010 12:41 pm

JC wrote:Maybe StevenB, who has Thames Trader trucks coming out of his ears , can shed some light on this one.

And then some.

500E was the truck before the Thames Trader. Also known as the ET6 it could be had with a flat head V8 or the trusty "Cost Cutter 4" available in petrol or diesel.

Steve

JC · Post by JC » Tue Sep 14, 2010 6:52 am

I've heard that the diesel truck engines turned faster than our tractor engines. Were there any other differences?

icom102 · Post by **icom102** » Sun Jul 31, 2011 9:52 pm

Hi guys just some updated pictures bit of a difference from the last ones

halloween · Post by **halloween** » Mon Aug 01, 2011 8:57 pm

Good Pics! And nice to see another old girl coming back to life!

Where did you get your bits from?

icom102 · Post by **icom102** » Mon Aug 01, 2011 9:12 pm

Thanks

for them from Sylvan tractor spares kells co meath

fixradio · Post by **fixradio** » Fri Aug 12, 2011 3:27 am

HI , Are you a ham radio operator? I see a Yagi antenna in one of the pictures.
Greg AI0B

icom102 · Post by **icom102** » Fri Aug 12, 2011 6:08 pm

Hi Greg that was for Commerical FM

EngineMan · Post by **EngineMan** » Fri May 11, 2012 2:27 pm

And if you do end up buying a new switch make sure its the right one, they sometimes send out the wrong one's and they don't fit.

icom102 · Post by **icom102** » Fri May 11, 2012 5:20 pm

New switch got an alls workibetter tyres fitted now as well

The Fordson Tractor Pages Forum

Starter Switch

Re: Starter Switch

Re: Starter Switch

Re: Starter Switch

Re: Starter Switch

Re: Starter Switch

Re: Starter Switch

Re: Starter Switch