Page 1 of 1

Something on / in the gearbox

Posted: Tue Jul 08, 2008 7:50 pm
by Frans
Hello in/on the gearbox from my Power major is a small axel its nowhere to connected can someone tell me what it is?

Image
Image

Posted: Tue Jul 08, 2008 8:18 pm
by Brian
Its where the handbrake fits. Looks like someone has removed yours possibly because it seized up.

Posted: Tue Jul 08, 2008 8:43 pm
by Kiwi Kev
Frans
What is the sandwich box mounted behind your gearbox. :? Is it 4WD or a reduction box.
Kiwi Kev

Posted: Tue Jul 08, 2008 8:55 pm
by Frans
Thanks for the fast reply must be the Handbrake, I will take a look If I can remove it or re install it.

Its a 4wd conversion from 1960. I will post a photo in a few minuts

Frans

Posted: Tue Jul 08, 2008 8:59 pm
by Brian
Frans,

I should have said welcome to the board. We are "on the ball" on this site and try to answer queries as fast as possible.

Posted: Tue Jul 08, 2008 9:15 pm
by Frans
Hello Brian and others,

I was reading the board at some time but didnt have the time to ask something and now when its a bit raining ect outside

Here is a picture of my Major's the 4 wd is onder cunstruction nowImage

regards Frans

Posted: Tue Jul 08, 2008 9:22 pm
by Frans
and here an o show (from the Club) athe 18 of may
Image

Without the cab and all the tin work

Posted: Tue Jul 08, 2008 10:05 pm
by Brian
They look great Frans

Posted: Wed Jul 09, 2008 2:08 am
by Kiwi Kev
Frans
You,ve got two very nice tractors there. :clap: :beer:
Kiwi Kev

Posted: Wed Jul 09, 2008 7:37 pm
by Pascal
Hi Frans,

Welcome!
You have 2 very nice tractors!!

Is the cab on the 4WD original? Perhaps from a company, that modified Fordson's/Ford's in these days like "Bakker Ulrum"?

Posted: Wed Jul 09, 2008 7:42 pm
by Frans
Hello Pascal

the cab was self made by the previus owner 35 years ago and I took it off (going to China)

Its fitted with a 6 cylinder 590 FL

the firm Bakker ulrum is unknown by me

regards Frans

Posted: Wed Jul 09, 2008 8:39 pm
by henk
Hello Frans,

Welcome on board. Nice to have someone from Holland again.
Very nice couple.
I assume the nose is modified for the six cylinder instead of the hood. Never saw that before.

Posted: Wed Jul 09, 2008 11:11 pm
by essex pete
Well spotted Henk 8)

Posted: Thu Jul 10, 2008 6:32 pm
by Frans
hello Henk a.o.

The Nose is modified and the hood to

the Hood to fitted the 6 cylinder and the nose to cover the front weights..... why I dont know ?

Frans