Page 1 of 1
wheels
Posted: Tue Nov 13, 2012 10:00 pm
by majorfox
could anyone please tell me at what year and model did they use the three spoke cast front wheels??
Re: wheels
Posted: Tue Nov 13, 2012 10:35 pm
by Mjg1705
They wer first used on the power major from about 1958-59 and then afterwards were used on the orange super from 1960 to 1962 then converted to steel wheels for the new performance.
Re: wheels
Posted: Wed Nov 14, 2012 2:00 pm
by Dandy Dave
Also depends on where the tractors were shipped. Dandy Dave!
Re: wheels
Posted: Wed Nov 14, 2012 7:36 pm
by majorfox
Thanks for the replies! I've got a 1960 power major which I've only bought recently
but it has the 4 spoke/hole wheels fitted.
Re: wheels
Posted: Wed Nov 14, 2012 9:25 pm
by halloween
I don't think you should see it as too much of a problem. I have a 59 Power Major with the steel wheels!
Re: wheels
Posted: Thu Nov 15, 2012 2:01 am
by super6954
majorfox wrote:Thanks for the replies! I've got a 1960 power major which I've only bought recently
but it has the 4 spoke/hole wheels fitted.
Hi
If your only going to use it then it won't matter and depending what you do with the 3 point those casts keep the front down more.

.
if you are going to do a concourse restoration and try winning prizes it will be minus a lot of points and not in the top 3

, then you need either 3 spokes or change to original not repro cast hubs and steel rims on 7.50 x16 tyres . Also going this way would make her lighter to tow round to shows on a trailer. 2 cast front wheels weigh a fair bit

.
Regards Robert
Re: wheels
Posted: Thu Nov 15, 2012 8:48 pm
by majorfox
to be honest i prefer the four hole cast wheels so think i'll stick with them plus it will save alot of hassle as they have new tyres on and i dont really want to change them!!

Re: wheels
Posted: Fri Nov 16, 2012 12:37 am
by super6954
majorfox wrote:to be honest i prefer the four hole cast wheels so think i'll stick with them plus it will save alot of hassle as they have new tyres on and i dont really want to change them!!

Hi
That's a good plan Those are a finger trapping miserable thing to change trust me if you've never done it

, and the tyre shop probably would not want to see you with them either. That's why I do all my own tyres now including the fluid filled ones, our guys don't want to come out to tractors anymore unless you wanna pay stupid money for it

.
Regards Robert
Re: wheels
Posted: Mon Apr 08, 2013 5:44 am
by P29044
Does anyone know if there is a different rim that is interchangable with the front rim on a 53 Major that will also hold up to having a front end loader on it. Living in South Carolina there are not many Fordsons around these parts and I need a new front rim. Not looking for show. Use this tractor on my small farm so pretty ain't important, reliability is.