Power Major Clutch Release Arm

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Post Reply
Keith@montloue
Not Quite Blue Yet
Posts: 12
Joined: Fri Aug 12, 2011 3:18 pm
Location: Brittany, France
Contact:
Contact Keith@montloue

Power Major Clutch Release Arm

Post by Keith@montloue »

Morning, Does anyone know the amount of movement should be on the Power Major Clutch Release Arm (approx) before the thrust bearing picks up on the Clutch adjusters. :?:
:beer:
Top
henk
Site Governance Team & Expert Team
Site Governance Team & Expert Team
Posts: 2089
Joined: Wed Apr 16, 2008 8:56 pm
Location: Arnemuiden, The Netherlands
Contact:
Contact henk

Re: Power Major Clutch Release Arm

Post by henk »

Single clutch: free travel of the pedal, 1.5 to 2 inches.
Dual clutch: free travel of the pedal 0.5 inches, afther total clutch pedal travel.
Kind regards, Henk

Fordson New Major February 1957 Mark I
Top
Keith@montloue
Not Quite Blue Yet
Posts: 12
Joined: Fri Aug 12, 2011 3:18 pm
Location: Brittany, France
Contact:
Contact Keith@montloue

Re: Power Major Clutch Release Arm

Post by Keith@montloue »

Thanks Henk

I was looking for the amount of movement of the Clutch Release Arm ( on dual clutch) not the pedal, as at the moment have no clutch pedal etc fitted on. As needs rebuilding as had about 6 " of free play :cry:

Keith
Top
Post Reply

Return to “Fordson New Major”