re fitting head whats the torque setting and tappet
re fitting head whats the torque setting and tappet
What setting are the tappets on fordson major and head bolt settings
-
henk
- Site Governance Team & Expert Team
- Posts: 2085
- Joined: Wed Apr 16, 2008 8:56 pm
- Location: Arnemuiden, The Netherlands
- Contact:
Re: re fitting head whats the torque setting and tappet
I&T data:
Head 85-90 ft.lbs / 115 - 122 Nw/M. I did it in three rounds.
Manifold 20 - 25 ft.lbs / 27 - 33 Nw/M.
Tappets inlet 0.015
Tappets outlet 0.012
Head 85-90 ft.lbs / 115 - 122 Nw/M. I did it in three rounds.
Manifold 20 - 25 ft.lbs / 27 - 33 Nw/M.
Tappets inlet 0.015
Tappets outlet 0.012
Kind regards, Henk
Fordson New Major February 1957 Mark I
Fordson New Major February 1957 Mark I