Page 1 of 1
Lift pump
Posted: Thu May 07, 2015 12:00 pm
by Dazo1960
I can not get the lift pump to fill to the top only fills 3/4 any ideas regards Darryl
Re: Lift pump
Posted: Thu May 07, 2015 3:52 pm
by Pavel
Had that problem myself. Apparently there are two different pumps with different flange sizes -- one with a glass dome and one with only a metal cover. I obtained a glass domed one and had to make an aluminium plate to cover the extra sized 'hole'. Works well.
Pavel
Re: Lift pump
Posted: Thu May 07, 2015 4:54 pm
by Brian
Should be OK, they do run like that sometimes. As long as you are getting a full flow of fuel down the pipe don't worry.
Re: Lift pump
Posted: Thu May 07, 2015 5:12 pm
by Dazo1960
Thank you I was told it should be full regards Darryl
Re: Lift pump
Posted: Thu May 07, 2015 11:57 pm
by oehrick
Just a thought, has yours got the fine circular gauze filter fitted (which plugs in the centre of the pump under the dome) ??
Re: Lift pump
Posted: Fri May 08, 2015 1:09 pm
by Dazo1960
Yes I believe it has regards Darryl