Unload valve

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Post Reply
woodcutter
True Blue
Posts: 198
Joined: Tue Oct 18, 2011 10:34 pm
Location: hereford

Unload valve

Post by woodcutter »

I’ve just took the lid off my super major and valve was stuck so now it’s removed the oring is no good what’s my best option can I just put it back in with out oring will it all work ok? or try to find an oring

mathias1
Site Governance Team
Site Governance Team
Posts: 787
Joined: Fri Jul 08, 2016 7:11 pm
Location: Antwerp - Belgium

Re: Unload valve

Post by mathias1 »

Hi,

somewhere on the forum Brian advised it's better to leave of the o-ring. I've done this also and the hydraulics did work without it.
Fordson Super Major New Performance
County Super 4 built on the Fordson Super Major
Selene built on the Fordson Super Major New Performance with Silvant winch

woodcutter
True Blue
Posts: 198
Joined: Tue Oct 18, 2011 10:34 pm
Location: hereford

Re: Unload valve

Post by woodcutter »

Ok thanks valve still seems sticky, when pushed right in but smooth until it gets up to the end

Post Reply