Fasse valve for SM to run 4 Hyd lines from JD 335 Round Baler?

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Post Reply
lakebilly
Not Quite Blue Yet
Posts: 34
Joined: Wed Jun 17, 2009 11:48 pm
Location: Fingerlakes, NY
Contact:

Fasse valve for SM to run 4 Hyd lines from JD 335 Round Baler?

Post by lakebilly »

I bought a JD 335 Round Baler & it has 4 lines from baler to tractor. My Super Major (63) has only two lines.
What do I need to utilize the 4 lines?
Also how to wire bale indicator? where to look for wiring schematic?

Image
63 Fordson Super Major "Babe", 1953 Jubilee, IH 656, Ford 961. Farmall H, Kubota 3430
FB pic page of tractors; https://www.facebook.com/pg/Unkle-Sonny ... 2873587074

Emiel
True Blue
Posts: 729
Joined: Wed Apr 16, 2008 3:22 pm
Location: Netherlands

Re: Fasse valve for SM to run 4 Hyd lines from JD 335 Round Baler?

Post by Emiel »

Hi,

First you should find out whether your JD baler is set up for a closed center or open center hydraulic system on a tractor.

When open center, then a valve chest with more spool valves can be set up and connected to your original hydrauclics. You should althoug find out whether you need 4 single acting, 2 double acting of 2 double and 2 single acting.

Might be a super has a little bit to little oil flow to get things running really smooth.
Best regards

Emiel

N 1937, E27N 1948, 8N 1949, E27N 1950, E1A Diesel 1953, E1ADKN PP 1956, Dexta 1959, NH Clayson M103 1964

mathias1
Site Governance Team
Site Governance Team
Posts: 787
Joined: Fri Jul 08, 2016 7:11 pm
Location: Antwerp - Belgium

Re: Fasse valve for SM to run 4 Hyd lines from JD 335 Round Baler?

Post by mathias1 »

Will you have enough HP for this?
Fordson Super Major New Performance
County Super 4 built on the Fordson Super Major
Selene built on the Fordson Super Major New Performance with Silvant winch

lakebilly
Not Quite Blue Yet
Posts: 34
Joined: Wed Jun 17, 2009 11:48 pm
Location: Fingerlakes, NY
Contact:

Re: Fasse valve for SM to run 4 Hyd lines from JD 335 Round Baler?

Post by lakebilly »

Thanks for replies. Completely swamped w/too much to do. instead of researching, I bought a tractor w/4 remotes (656 International). Sorry I didn't reply sooner. thank you for your input.
63 Fordson Super Major "Babe", 1953 Jubilee, IH 656, Ford 961. Farmall H, Kubota 3430
FB pic page of tractors; https://www.facebook.com/pg/Unkle-Sonny ... 2873587074

Post Reply