Major Injection Pump Timing Data. Source Ford Service Letter

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Locked
Brian
Grumpy
Grumpy
Posts: 5216
Joined: Wed Apr 16, 2008 2:07 pm
Location: Norfolk, England.

Major Injection Pump Timing Data. Source Ford Service Letter

Post by Brian »

Injection Pump Timing. Fordson Major Range.

Mark 1 Engine to No.1308977 .. 29 degrees BTDC.
Mark 1 Engine after No 1308978 .. 26 degrees BTDC.
.
Mark 2 Engine only when fitted with a steel head gasket .. 19 degrees BTDC. This head gasket was only used for a few months as it caused major failures and a copper/asbestos unit replaced it in service. Do not use the 19 degree setting on any Major.

Mark 2 Engine with copper/asbestos gasket .. 23 degrees BTDC.

Mark 3 Engine .. 23 degrees BTDC

Mark 3 Engine with Minimec Pump .. 21 degrees BTDC

Image
Fordson Tractor Pages, now officially linked to: Fordson Tractor Club of Australia, Ford and Fordson Association and Blue Force.
Brian

Locked