FSM CLUTCH COVER ASSEMBLY

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Post Reply
kissamo
Not Quite Blue Yet
Posts: 21
Joined: Tue Apr 16, 2019 8:27 am

FSM CLUTCH COVER ASSEMBLY

Post by kissamo »

DEAR enthusiasts;

I ordered a clutch for My FSM. I opted for -Clutch Cover Assembly - Single 13". I later noted that also -Clutch Cover Single - 11" is for FSM.
CAN any of the clutch cover be fitted at the flywheel of FSM. I DONT KNOW WHICH ONE IS FITTED IN MY FSM BY NOW.

ANY CLUE ON THIS

BEST RGDS
ELIAS

Emiel
True Blue
Posts: 729
Joined: Wed Apr 16, 2008 3:22 pm
Location: Netherlands

Re: FSM CLUTCH COVER ASSEMBLY

Post by Emiel »

Hi Elias,

11” is standard fitted. 13” on heavy duty applications. This one might need an other flywheel.

Most FSM in Europe are fitted with a dual clutch. Which had another gearbox, another type of clutch and another Flywheel.

Regards emiel
Best regards

Emiel

N 1937, E27N 1948, 8N 1949, E27N 1950, E1A Diesel 1953, E1ADKN PP 1956, Dexta 1959, NH Clayson M103 1964

Emiel
True Blue
Posts: 729
Joined: Wed Apr 16, 2008 3:22 pm
Location: Netherlands

Re: FSM CLUTCH COVER ASSEMBLY

Post by Emiel »

Hi,

The 13” needs a different flywheel with 8 instead of 6 mounting holes.

Rgds emiel
Best regards

Emiel

N 1937, E27N 1948, 8N 1949, E27N 1950, E1A Diesel 1953, E1ADKN PP 1956, Dexta 1959, NH Clayson M103 1964

Billy26F5
True Blue
Posts: 1912
Joined: Fri Jun 26, 2020 12:01 am
Location: On Billy

Re: FSM CLUTCH COVER ASSEMBLY

Post by Billy26F5 »

A 13" clutch has a screw cap greaser on the gearbox RH side, the dual clutch enables the PTO to work and gear changing simultaneously, with very noticeable dual pressure points when pressing the pedal (assuming the stop pin is not in the upper position).
Sandy
ImageImageImage

mathias1
Site Governance Team
Site Governance Team
Posts: 787
Joined: Fri Jul 08, 2016 7:11 pm
Location: Antwerp - Belgium

Re: FSM CLUTCH COVER ASSEMBLY

Post by mathias1 »

yes,
the grease nipple on the RH side is the trick to find out it's a 13" clutch
Fordson Super Major New Performance
County Super 4 built on the Fordson Super Major
Selene built on the Fordson Super Major New Performance with Silvant winch

mathias1
Site Governance Team
Site Governance Team
Posts: 787
Joined: Fri Jul 08, 2016 7:11 pm
Location: Antwerp - Belgium

Re: FSM CLUTCH COVER ASSEMBLY

Post by mathias1 »

Here is a picture of the cable for the grease nipple
Image
Fordson Super Major New Performance
County Super 4 built on the Fordson Super Major
Selene built on the Fordson Super Major New Performance with Silvant winch

Post Reply