The Fordson Tractor Pages Forum

DEAR enthusiasts;

I ordered a clutch for My FSM. I opted for -Clutch Cover Assembly - Single 13". I later noted that also -Clutch Cover Single - 11" is for FSM.
CAN any of the clutch cover be fitted at the flywheel of FSM. I DONT KNOW WHICH ONE IS FITTED IN MY FSM BY NOW.

ANY CLUE ON THIS

BEST RGDS
ELIAS

Hi Elias,

11” is standard fitted. 13” on heavy duty applications. This one might need an other flywheel.

Most FSM in Europe are fitted with a dual clutch. Which had another gearbox, another type of clutch and another Flywheel.

Regards emiel

Hi,

The 13” needs a different flywheel with 8 instead of 6 mounting holes.

Rgds emiel

A 13" clutch has a screw cap greaser on the gearbox RH side, the dual clutch enables the PTO to work and gear changing simultaneously, with very noticeable dual pressure points when pressing the pedal (assuming the stop pin is not in the upper position).
Sandy

yes,
the grease nipple on the RH side is the trick to find out it's a 13" clutch

Here is a picture of the cable for the grease nipple