Super Major hydraulics

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Emiel
True Blue
Posts: 729
Joined: Wed Apr 16, 2008 3:22 pm
Location: Netherlands

Re: Super Major hydraulics

Post by Emiel »

liam wrote:
Thu Sep 02, 2021 11:05 pm
Hi everyone,

The valve you see for sale screws into the end of the lift cylinder under the top cover. The relief valve that you need can not be got new. You will have to get a second hand one.

Liam
Hi,

Thank you. Learned a lot. Then the part works. Strange the current ones are 170 bar, the originals were around 190 according to manual.

Thanks again
Best regards

Emiel

N 1937, E27N 1948, 8N 1949, E27N 1950, E1A Diesel 1953, E1ADKN PP 1956, Dexta 1959, NH Clayson M103 1964

Emiel
True Blue
Posts: 729
Joined: Wed Apr 16, 2008 3:22 pm
Location: Netherlands

Re: Super Major hydraulics

Post by Emiel »

Billy26F5 wrote:
Wed Sep 01, 2021 11:41 pm

Image
Hi Sandy,

I thought this hex head was just a cover over the actual valve, but it is part of the valve itself.

Now I finally understand how it is.
Best regards

Emiel

N 1937, E27N 1948, 8N 1949, E27N 1950, E1A Diesel 1953, E1ADKN PP 1956, Dexta 1959, NH Clayson M103 1964

Post Reply