Servicing and finding new unusual features
Posted: Sat Jan 01, 2022 1:36 am
We've just done Billy's 150th engine oil and filter change and 50th gearbox oil change, with some dirt in the gearbox which we shifted easily. And looking through the hole in the sump we saw the main bearing bolts, and saw that they were held with locking wire! Not the usual thickness wire, but heavy 1/8" wire, as left by the factory.
Getting all reved up for the change.

Old oil bottles awaiting old oil.






All the filters off and all but a few drops to drain.






The air filter has suffered neglect in the past as can be seen from the rust.


Empty engine.

Dirt in gearbox.

View through the sump at the main bearing bolts and the large locking wire (there won't be a better pic until the next change).

Clean gearbox ready for new SAE 90 oil.

All done and running again.

Sandy
Getting all reved up for the change.

Old oil bottles awaiting old oil.






All the filters off and all but a few drops to drain.






The air filter has suffered neglect in the past as can be seen from the rust.


Empty engine.

Dirt in gearbox.

View through the sump at the main bearing bolts and the large locking wire (there won't be a better pic until the next change).

Clean gearbox ready for new SAE 90 oil.

All done and running again.

Sandy