Page 1 of 1
Baling with '55 FMD
Posted: Tue Jun 07, 2022 4:47 pm
by leeroy
As long as the baler has a working over running clutch I should not need an over running clutch on the tractors PTO, correct?
Re: Baling with '55 FMD
Posted: Tue Jun 07, 2022 6:11 pm
by Emiel
Hi,
IMHO one overrun clutch is enough.
Please make sure your pto is in perfect condition. I once had an shaft going defect while baking on our 5610. The parts came really close to the rear window. That would have been problematic on a major.
Please do not over rev your engine. Around 1150 rpm you have your 540 pto speed.
Re: Baling with '55 FMD
Posted: Tue Jun 07, 2022 6:13 pm
by Billy26F5
Agree 100%.
Sandy
Re: Baling with '55 FMD
Posted: Tue Jun 07, 2022 9:12 pm
by leeroy
Thank you both.
Emiel thanks for mentioning the pto shaft condition as I've never given that a thought. It is in good condition with good universal joints, but I'll be sure to check them all.