drag link rubber dimensions

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Post Reply
peter2
True Blue
Posts: 141
Joined: Fri Jul 12, 2013 11:31 am
Location: Rheinhessen, Germany

drag link rubber dimensions

Post by peter2 »

Hi,

does anyone know the dimensions for the front rubber sealing of the drag link? Mine has a hole and needs replacement.

I measured 22mm on the smaller end on the pin and about 28 on the outside, and 43mm on the outside of the bigger end, so I assume about 38mm inner diameter of the big end. And I forgot to take the length. :?
Are both ends of the drag link the same. From the agriline website it seems so ...

Peter
1963 Super Major

Billy26F5
True Blue
Posts: 1913
Joined: Fri Jun 26, 2020 12:01 am
Location: On Billy

Re: drag link rubber dimensions

Post by Billy26F5 »

Do you have the sealed drag link or the adjustable one? I can't really help you with the sealed type as we don't have one, on the adjustable one there's a rectangular piece of felt clipped on with a bracket.
Image
Sandy
ImageImageImage

peter2
True Blue
Posts: 141
Joined: Fri Jul 12, 2013 11:31 am
Location: Rheinhessen, Germany

Re: drag link rubber dimensions

Post by peter2 »

Hi Sandy,

it's the sealed drag link at my Super.

Peter
1963 Super Major

Billy26F5
True Blue
Posts: 1913
Joined: Fri Jun 26, 2020 12:01 am
Location: On Billy

Re: drag link rubber dimensions

Post by Billy26F5 »

I think the ends are the same on the sealed one (they aren't quite on the adjustable one), you could see if Agriline can provide you with some sizes or even rubbers even if they don't list them.
Sandy
ImageImageImage

Post Reply