hydraulic pump overhaul

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Post Reply
mathias1
Site Governance Team
Site Governance Team
Posts: 787
Joined: Fri Jul 08, 2016 7:11 pm
Location: Antwerp - Belgium

hydraulic pump overhaul

Post by mathias1 »

Hi,

I was looking at the drawing of the hydraulic pump and there are only a few seals in there:
2 o -rings: 4,197"id 0,103" thick (partnr 116513-es)

and 1 seal: 11/16'' x 1 1/8'' x 1/4'' (partnr e97-gf-9)

Is this a difficult job and worth looking at? Anyone done this before?
Fordson Super Major New Performance
County Super 4 built on the Fordson Super Major
Selene built on the Fordson Super Major New Performance with Silvant winch

Billy26F5
True Blue
Posts: 1913
Joined: Fri Jun 26, 2020 12:01 am
Location: On Billy

Re: hydraulic pump overhaul

Post by Billy26F5 »

The only big difficulty I see is getting the new bits, and removing the external gear, but it might be awkward to deal with the o-rings. I assume you've seen the manual by the way (if not I recommend that you do look at it).
Sandy
ImageImageImage

Post Reply