This piece that my chisel is pointing to should rotate freely right? I removed the pawl - thats what goes into those 2 bolt holes.
Parking Latch
-
DntBrnDPig
- Not Quite Blue Yet
- Posts: 17
- Joined: Thu May 29, 2014 5:17 pm
Parking Latch
The parking latch is froze up on my 58'. I've been trying to get it free all morning.
This piece that my chisel is pointing to should rotate freely right? I removed the pawl - thats what goes into those 2 bolt holes.
This piece that my chisel is pointing to should rotate freely right? I removed the pawl - thats what goes into those 2 bolt holes.
-
Tubal Cain
- Site Expert Team
- Posts: 418
- Joined: Wed Apr 16, 2008 8:47 pm
- Location: PEMBROKESHIRE WEST WALES
Re: Parking Latch
Your chisel is pointing to the pawl assembly. The sector or ratchet bolts onto the axle casing.
Yes the pawl assembly should be free to turn, I suggest that you apply some heat to the end of the lever to try and fee it off.
Gerald
Yes the pawl assembly should be free to turn, I suggest that you apply some heat to the end of the lever to try and fee it off.
Gerald