Page 1 of 1
drawbar
Posted: Mon Apr 12, 2010 10:30 pm
by john.n
ive been looking into getting a drawbar, and decided that for what it actually is, might be worth making one since i have all the brackets. is there anything special about the type of metal? could someone help with the dimensions? a diagram would be of great help and also pin sizes, is it same diameter as cat2 pin?
thanks.
Posted: Tue Apr 13, 2010 7:11 am
by Foxen
can't help you much with drawings or such, but I can tell you what thickness and such I have on my super major(it's a homegrown drawbar), it's made out of 20x50 steel, the hole for the pin is 26mm... the hole actually is 34mm(I didn't build this) but I'm having a bush made out of steel to press into it and weld up there(giving me the possibility to swap it out if it gets worn)...
Posted: Mon Apr 19, 2010 5:38 pm
by john.n
been to old 20 and asked about drawbars. all they could offer were ferguson ones. unfortunatly not long enough. found a sutable pin for the fixing closest to the front. 30mm pin.
any help with dimensions is good.
Posted: Mon Apr 19, 2010 9:43 pm
by Brian
Try Malcolm Hipperson at Downham Market.