Page 1 of 1
It went ----- Ping
Posted: Fri Oct 29, 2010 4:38 pm
by Jerry Coles
Hi all
Well there I was carefully assembling my oil pump and the intermediate gear circlip retainer went PING! and has now dissappeared.
So can anyone help me with the size please as the parts manual just says 'circlip'. I think the shaft diameter is 21/32" and the internal groove diameter is 9/16". Which size do I ask for?
Regards
Jerry
Posted: Sat Oct 30, 2010 4:44 am
by lbonlake
maybe OEM #: E43CF9 retaining clip, oil pump gear
Elbie
Posted: Sat Oct 30, 2010 11:43 am
by Bensdexta
Does this sound like it? 15 1 CAR40181 SNAP RING Circlip, Drive Shaft Seal, Years: 01/01/1957-12/31/1964
Go to vugot.com. Follow your nose via Fordson > Parts to the Dexta online parts list and look for your part. Looks like the part# has been superceded.
Suggest you phone Dave at Vugot (01258-486209) and ask him to send you one. He's a v helpful guy
All the best
Posted: Mon Nov 01, 2010 11:08 pm
by Jerry Coles
Spoke to Dave as sugested by Bensdexta, he was sorry but he couldn't help. Measured the internal diameter again after gringing down the sides of a pair of calipers so they bottomed in the groove and it came up with 1/2"!!
Tried the internet - Yes if I wanted 340 assorted or 50 of that size only for £8-10.00.
Went down to the local car accessory shop and bought two for 20p!! - problem solved!
Cheers
Jerry
Posted: Tue Nov 02, 2010 12:29 am
by Bensdexta
Jerry,
For future ref, was
CAR40181 SNAP RING Circlip, Drive Shaft Seal, Years: 01/01/1957-12/31/1964 the correct part?
Glad you got sorted. Well done!