Page 1 of 1
Fordson Dexta number plate light
Posted: Wed Aug 13, 2008 9:36 am
by llanfair
HI, Can anyone out there tell me the correct wiring route for the rear number plate light on my 1979 Dexta.
Regards, Llanfair.
Posted: Sun Aug 24, 2008 1:20 pm
by npaisnel
I have some of the original bits left on mine, but not sure How much. I know there should be a piece of bent steel brake pipe that takes the single wire to the rear axle. I'll post some pics when i gt time
Posted: Mon Aug 25, 2008 1:55 pm
by llanfair
Hi, npaisnel
Thanks for replying to my question (number plate light) i shall look forward to your images.
By the way the tractor seat you have restored is the same as originally fitted to my 1959 dexta.
According to my dexta history book bonnet badges were not fitted until the new style dexta 1960 and lights were fitted in the grills.
My dexta had number plate brackets and light fitted from new.
Regards, LLANFAIR
Posted: Mon Aug 25, 2008 3:26 pm
by npaisnel
Interesting about the seat, exactly the same? flat front with no bulge and no Channels in the shape of a diagonal cross?
Posted: Mon Aug 25, 2008 7:14 pm
by npaisnel
Well here are the pics. Actually a bit difficult to photograph and see. Looks like the pipe has been crushed and broken by the lift arms that attach to the trailer hitch. It looks like the pipe would have gone all the way along the rear of the axle stopping just short of the wing.
I have highlighted the pipe in red.
