The Fordson Tractor Pages Forum

Asmy diesel lines has started to leak at the fitting, I made up my mind to redo the Diesel lines on my Dexta, this I decided some time ago, but havn't gotten ther yet.
No I have some time, and will try to get it done. I may have asked this before, but I need to replace the fitting that goes on the diesel line from the fuel tap to the diesel lift pump.

This is the one I need to replace, what size is it?


I know I can get the complete line from Agriline, but I want to make them myself

Winchester wrote:This is the one I need to replace, what size is it?

It may not be that easy to source - why not clean it up and reuse it, should be fine?

Replace might have been the wrong word to use, I need a second one, got only that one, need one for the other end of the line.
The one sitting there was some shade tree mechanic thing, made up with O-rings and plumber tape. Think it has been done that way when an owner
at some point put in a unoriginal fuel tap. I have put back an original fuel tap, and now that fitting going into the fuel tap is to small.

It's the same dimension as the two on the diesel lift pump if that helps

Could it be this:http://www.fordtractorspares.co.uk/inde ... t&Itemid=1

Not for a fordson I know, but if the threads and size fit it don't matter....

i think agriline sell the unions loose also the olives

Ask Malcolm Hipperson - I expect he has an original one.

I think I have one for you, Tom.