Dexta Backhoe?

[Cvans]

I'm in the process of purchasing a used New Holland 757c 3 point backhoe and would like to use it on the Dexta. Would it be possible to run it off of the tractors hydraulics? I have one hydraulic line running to the rear of the tractor and need to know where the return line should be piped to.
Thanks for your help.

[frode]

You would dump the return line into a fitting at the filler plug. I would think the dexta hydraulics would have to little flow to get some decent speed on the controls on the backhoe.

[Cvans]

Double post. Ignore please

[Cvans]

I would think the dexta hydraulics would have to little flow to get some decent speed

Filler plug sounds good.
If it is slow at first that's fine as I have never run one of these things before and the slower it goes the less damage I will do.
There must be some flow out of this pump as it lifted the cycle mower almost too fast. But that was only one cylinder at a time.