1959 Broken lift arm control valve

[BabyDuke]

I hope someone can help me. I live in the US and have a '59 model Dexta. I have a broken control valve part # 957E-488-B blue, Cannot locate this particular part. I have found, in the Stevens tractor catalog, a control valve that replaces part #C7nn488H/J blue. Both have a diameter range of .5919/21, and my valve's diameter is .5920. Are these two parts compatible? Thanks in advance for any assistance.

Gordon Duke

[Billy26F5]

Hi Gordon,
It looks like these parts might be compatible, but I'm not sure; here's the parts book.
http://www.lutje-ford.nl/wp-content/upl ... anual-.pdf
page 39 part 82 in the diagram is the control valve.
Sandy

[BabyDuke]

Thank you Sandy for your reply. These are the 2 parts I was asking about. I'm just not sure if the 957E and the C7NN are representative of 2 different tractor models, and therefore different valves. The catalog I was looking at show the control valves inside the bushing that goes with it, and not the actual valve itself. I guess I could take a chance, but the valve cost $80.00. OH well, it's only money. But again, thank you for taking the time to respond.

[Billy26F5]

Dexta is 957E, Super Dexta is 960E; C7NN is something else, but I don't know what.
Sandy

[BabyDuke]

I have been doing research on the C7NN part numbers. It appears that they are Ford parts. Not sure if they are interchangeable as of yet.

[PghBill]

Baby Duke,
Have you tried the New Holland web site? There are many Dexta parts still available there.

[BabyDuke]

Yeah, I tried there as well. Thanks for the suggestion though.