Page 1 of 1
Rubber boot/cover fitted over the aux service control valve spool.
Posted: Mon Jan 27, 2025 6:53 am
by Mervyn Spencer
Hi, Would anyone possible have some dimensions of that rubber boot. I'm hoping that I maybe able to find a similar boot locally.
Mervyn.
Re: Rubber boot/cover fitted over the aux service control valve spool.
Posted: Mon Jan 27, 2025 11:37 am
by Billy26F5
I don't think I have pics at the moment, will take some later. It's a close fit on both the spool and the cap.
Sandy
Re: Rubber boot/cover fitted over the aux service control valve spool.
Posted: Tue Jan 28, 2025 12:31 pm
by Billy26F5
Here are the pics, a bit later than planned. This is Davie, the rubber is from the half Super Major
And here's Davie's original one, unfortunately incomplete.
Sandy
Re: Rubber boot/cover fitted over the aux service control valve spool.
Posted: Wed Jan 29, 2025 11:45 am
by Mervyn Spencer
Thank you Sandy for going the extra mile to post those photos. The original rubber on Davie is a great example. What I need to do now is take some measurements off my unit and see how close I can get to sourcing a boot locally, the chances are very slim though but worth a try.
Mervyn.
Re: Rubber boot/cover fitted over the aux service control valve spool.
Posted: Wed Jan 29, 2025 1:56 pm
by Billy26F5
A seal factor might be able to make one, just a thought. The repro ones are as usual poor.
Sandy