Ford 4000 Dash
-
- Not Quite Blue Yet
- Posts: 48
- Joined: Sun Apr 20, 2008 1:23 pm
- Location: Trimpley Worcestershire
- Contact:
Ford 4000 Dash
Has anyone got a good picture of the back of a 1967 Ford 4000 with an explaination of the terminals - I have the wiring loom connected up on the tractor but the dash is troubling me slighty where exactly the wires go
Ben Phillips
www.thetractorlad.co.uk
www.thetractorlad.co.uk
-
- Not Quite Blue Yet
- Posts: 48
- Joined: Sun Apr 20, 2008 1:23 pm
- Location: Trimpley Worcestershire
- Contact:
Ben Phillips
www.thetractorlad.co.uk
www.thetractorlad.co.uk
Ben,
Sorry its taken so long, excuse is too much work.
1 .. Temperature Gauge sender. .. Green Blue
2 .. Link from 6.
3 .. Fuel sender/instrument cluster earth wire. .. Black
4 .. Voltage stabaliser to fuel gauge (6 link).
5 .. Fuel tank sender to fuel gauge. .. Green Black.
6 .. Voltage stabaliser output to gauges.
7 .. Power to voltage stabaliser and link to ignition and oil pressure lights. .. White.
Voltage stabaliser is a dropping resistor to drop the voltage from 12V to 10V for the gauges.
My manual gives Green Blue for 4 and 6 but I seem to remember this was Brown.
Sorry its taken so long, excuse is too much work.
1 .. Temperature Gauge sender. .. Green Blue
2 .. Link from 6.
3 .. Fuel sender/instrument cluster earth wire. .. Black
4 .. Voltage stabaliser to fuel gauge (6 link).
5 .. Fuel tank sender to fuel gauge. .. Green Black.
6 .. Voltage stabaliser output to gauges.
7 .. Power to voltage stabaliser and link to ignition and oil pressure lights. .. White.
Voltage stabaliser is a dropping resistor to drop the voltage from 12V to 10V for the gauges.
My manual gives Green Blue for 4 and 6 but I seem to remember this was Brown.
Fordson Tractor Pages, now officially linked to: Fordson Tractor Club of Australia, Ford and Fordson Association and Blue Force.
Brian
Brian