4000 hydraulics

[shergar]

hello all

am thinking about fitting some double acting spool valves to my 4000 if i port off the auxiliary and return return feed via tapping the filler plug my question is if i put the auxiliary switch in the middle , lift arms and auxiliary would i be able to use both at the same time , wanting to use a reverse-able plough would this be possible? any tips would be great, not too hot on hydraulics

thanks wayne

[frode]

Fit an adapter like this under the plate on the lift, use a spool with power beyond capability. then you can have as many DAR outlets as you want without messing up the tipping pipe. Spools will also function correctly without messing up the 3-point linkage.

[shergar]

fit what type of adaptor frode?

[frode]

fit what type of adaptor frode?

sorry, I forgot to post the link

here it is:
http://www.ebay.com/itm/hydraulic-adapt ... 4ab4118c91

[shergar]

ok when you mean under the plate on the lift does this adaptor go under the auxiliary switch just under the seat ? sorry if i seem a bit dumb don't know much about hydraulics but learning fast!

[frode]

ok when you mean under the plate on the lift does this adaptor go under the auxiliary switch just under the seat ? sorry if i seem a bit dumb don't know much about hydraulics but learning fast!

yes, under the plate.

[shergar]

thanks for the info frode

dose any one know if i get one in the UK or do i have to get one shipped from the US?

thanks wayne