Wheel weight

henk · Post by **henk** » Thu Jul 19, 2012 8:54 pm

From wich model are these?

http://agrarisch.marktplaza.nl/mechanis ... 771307.htm

Dandy Dave · Post by **Dandy Dave** » Fri Jul 20, 2012 1:01 pm

Not weights, but wheel centers. Dandy Dave!

BearCreek Majors · Post by **BearCreek Majors** » Fri Jul 20, 2012 1:53 pm

5 hole centers, not from a Major but maybe a smaller Ford. I have never seen any like that on any Fords over here in the US.

Pat

Dandy Dave · Post by **Dandy Dave** » Sat Jul 21, 2012 2:14 pm

Yes, the old Ford and Fordson wheels here in the states are pressed steel. I'm not sure what they fit either? The 5 lugs should give a clue. Even the e27N has six. The Dexta has 8 like the 8N's. I bet there not Ford or Fordson at all. Dandy Dave!

Aussie Frank · Post by **Aussie Frank** » Sat Jul 21, 2012 3:44 pm

Hi,

I have the feeling they may be Allis Chalmers rear wheel centers. I did a quick image search on the web and I found this picture of a 1945 Allis Chalmers C. http://www.butchstractorbarn.com/pictures/c.jpg
It looks right to me.

Regards, Frank.

Dandy Dave · Post by **Dandy Dave** » Sat Jul 21, 2012 5:06 pm

Hey Aussie Frank...I was just out in my yard fixing a wire on a trailer, and right next to me is a 1948 Allis Challmers B that was recently dropped off. I think we have nailed it. Dandy Dave!

henk · Post by **henk** » Sat Jul 21, 2012 8:42 pm

That's it folks.
Mystery salved.

Dandy Dave · Post by **Dandy Dave** » Sun Jul 22, 2012 3:48 am

AAAAHHHHHRRRRRR Matey..... Thar she blows.... Ann Allis Chalmers B. Harrrr har Harrrr Hardy harrrr harrrrrr. Long John Silver be me. But me Long John's be A dull red matey, Over washed and full O holes..Har har....

.Dandy Dave!

henk · Post by **henk** » Sun Jul 22, 2012 11:17 am

The seller will change the ad.

The Fordson Tractor Pages Forum

Wheel weight

Wheel weight

Re: Wheel weight

Re: Wheel weight

Re: Wheel weight

Re: Wheel weight

Re: Wheel weight

Re: Wheel weight

Re: Wheel weight

Re: Wheel weight