New Performance Super Major raised PTO shaft

Looking for parts? Got parts? Post it here!
Post Reply
Roadless63
True Blue
Posts: 237
Joined: Tue May 06, 2008 10:49 pm
Location: Derby/Hants

New Performance Super Major raised PTO shaft

Post by Roadless63 »

I'm looking for the driveshaft for a new performance super major to fit a raised PTO. I have a spare gearbox unit but missing the long driveshaft. These are specific to the new performance super major as there is a little bearing on the end of the long shaft rather than a large nut/split pin found on the earlier type of raised PTO. If anyone has one please let me know.
Thanks, Ed.

d.andersen
True Blue
Posts: 93
Joined: Tue Mar 09, 2010 7:30 pm

Re: New Performance Super Major raised PTO shaft

Post by d.andersen »

I'm pretty sure you need thr raised box too, if you want to ude the model with end bearing. I have one old model without the bearing and 1:3 ratio. And one later with end bearing but still 1:3 ratio. The correct for new performance i s 1:1 ratio. Also you need to change your hydraulic pump gear.
Fordson forever

Roadless63
True Blue
Posts: 237
Joined: Tue May 06, 2008 10:49 pm
Location: Derby/Hants

Re: New Performance Super Major raised PTO shaft

Post by Roadless63 »

Hi, I have the 1:1 box but not the shaft to go with it. I have another 1:1 complete unit on a tractor and quite a few of the earlier type.

d.andersen
True Blue
Posts: 93
Joined: Tue Mar 09, 2010 7:30 pm

Re: New Performance Super Major raised PTO shaft

Post by d.andersen »

Is one of them for sale ?
Fordson forever

Post Reply