Wanted - Dexta lower hydraulic arm

Looking for parts? Got parts? Post it here!
Post Reply
MikesDexta
True Blue
Posts: 176
Joined: Tue Jul 11, 2017 10:32 pm

Wanted - Dexta lower hydraulic arm

Post by MikesDexta »

The RH lower hydraulic arm on my 1959 Dexta has always been welded (2 steel plates either side in what looks to be the attachment of a new ball end. It works but looks pretty bad so I am looking for a 2nd hand arm to replace it.
1959 Dexta
I'm not retired just re-deployed

Jerry Coles
True Blue
Posts: 541
Joined: Thu Apr 17, 2008 9:09 pm
Location: Camerton, Bath, UK

Re: Wanted - Dexta lower hydraulic arm

Post by Jerry Coles »

Where are you based? I have one you can have. BA20QD NE Somerset
Jerry Coles
Camerton, Bath, UK
West Highland White Terriers, Dexta's, E27N's and DUKW's

mathias1
Site Governance Team
Site Governance Team
Posts: 787
Joined: Fri Jul 08, 2016 7:11 pm
Location: Antwerp - Belgium

Re: Wanted - Dexta lower hydraulic arm

Post by mathias1 »

Mike, you can also use new weld on ends.
Fordson Super Major New Performance
County Super 4 built on the Fordson Super Major
Selene built on the Fordson Super Major New Performance with Silvant winch

MikesDexta
True Blue
Posts: 176
Joined: Tue Jul 11, 2017 10:32 pm

Re: Wanted - Dexta lower hydraulic arm

Post by MikesDexta »

Thanks both, I managed to get hold of one. The weld was too far back to solve with a weld on end I'm afraid.

Mike
1959 Dexta
I'm not retired just re-deployed

Post Reply