This forum is about the tools you use to service your Fordson tractor AND about the implements you use when out in the field with Ol' Blue.
Bensdexta
True Blue
Posts: 2666 Joined: Mon Sep 15, 2008 12:59 pmLocation: N Wales
Post
by Bensdexta Mon Sep 27, 2010 11:16 pm
Is anyone got a small woodprocessor?
Eg a Hakke Pilke Eagle:
It runs off the PTO 10hp requirement, has a 700mm circular saw blade which can cut 10" dia logs. It has a 4" screw splitter, but no conveyor between the two, ie it's manual transfer. Cost appears to be £1200, not hugely greater than a Ferguson cordsaw + splitter.
Any advice appreciated
Bensdexta - 1961 working for a living!
woodseaves
True Blue
Posts: 122 Joined: Sun Jun 27, 2010 12:46 pmLocation: Herefordshire, UK
Contact:
Post
by woodseaves Tue Sep 28, 2010 10:25 am
£1,550.00 Plus VAT From :
Davies Implements Ltd
Blaenteg, Trevaughan, Carmarthen, SA31 3QN.
Tel.: 01267 237726
www.daviesimplementsltd.co.uk
Supermanuel
True Blue
Posts: 53 Joined: Wed Sep 22, 2010 7:07 pmLocation: Espoo, Finland
Post
by Supermanuel Fri Oct 01, 2010 4:10 pm
I hv a JAPA 600. Max dia 300 mm, splitting in 2, 4 or 6 pieces with 3,2 m conveyor.
Without conveyor much slower and with it you can load directly on trailer. I consider it as highly recommendable.
http://www.japa.fi/index.php/klapikoneet.html New Performance Super Major Manuel 08D970466
Bensdexta
True Blue
Posts: 2666 Joined: Mon Sep 15, 2008 12:59 pmLocation: N Wales
Post
by Bensdexta Fri Oct 01, 2010 4:42 pm
Supermanuel wrote: I hv a JAPA 600. Max dia 300 mm, splitting in 2, 4 or 6 pieces with 3,2 m conveyor.
Hi,
Do you run it behind your Major? Have you a pic?
How many tonnes of wood do you process each year?
Thanks,
Bensdexta - 1961 working for a living!
