Belt pulley for a Major

This forum is about the tools you use to service your Fordson tractor AND about the implements you use when out in the field with Ol' Blue.
Post Reply
Kim
True Blue
Posts: 195
Joined: Thu Jan 15, 2009 11:20 pm
Location: Central Massachusetts, USA

Belt pulley for a Major

Post by Kim »

I recently picked up a belt pulley assembly for the side of my Major but the pulley itself was missing. The shaft seems to be a 1-3/8" six spline, but it does not interchange with the splines on the PTO. Is there another make of pulley that will interchange with the Fordson? As near as I can determine, the pulley should have about an 8 inch diameter. Thanks. :?:
Never give up!
Top
henk
Site Governance Team & Expert Team
Site Governance Team & Expert Team
Posts: 2069
Joined: Wed Apr 16, 2008 8:56 pm
Location: Arnemuiden, The Netherlands
Contact:
Contact henk

Re: Belt pulley for a Major

Post by henk »

Kim,

That shaft should have a spline that will fit in a pulley wheel and will not correspond with a pto spline.
Kind regards, Henk

Fordson New Major February 1957 Mark I
Top
Post Reply

Return to “Tools and Implements”