Page 1 of 1

Ford 102 plough

Posted: Fri Mar 10, 2017 2:04 am
by Deutz514
Hello i was wondering if anybody had some information about ford 102 ploughs they are a 2 bottom rollover the only thing I Know is they are very rare where i am and i believe they were built in the late 50s era and they came in 12,14 or 16 inch bottoms but unsure it is pretty hard to find information and parts seem almost impossible i wonder if they would be used on a major or power major seeming as the ford 600-800 series tractors seem to small any information would be greatly appreciated
Thanks mathew!

Here is a video of our plough in action dont mind the tractor in front of it

https://m.youtube.com/watch?v=otC74Aj1RA0

Re: Ford 102 plough

Posted: Sat Mar 11, 2017 12:22 am
by oehrick
Hi Deutz

I think there has been some discussion on these previously, if you put TS102 into the search box top right you may find the info you need

Good luck with the hunt, I think these may be expensive in the UK but they are about ifyou have deep enough pockets :eyes:

Re: Ford 102 plough

Posted: Sat Mar 11, 2017 5:51 pm
by Deutz514
Thanks oehrick but i believe the plough you are referring to was made by ransomes? I did look up the ts102 and while they have some similarities they are not the same i did some more researching and believe they were built from 1957-1960 and yes they were designed to be pulled with the ford 800 series tractors here in north america and were painted ford red not blue thanks again and i will keep digging and when the weather turns around i will snap some photos for everyone to see

Re: Ford 102 plough

Posted: Sat Mar 11, 2017 9:17 pm
by blackbob
You're making a tidy job, even though the soil looks hard underneath, and slippery on top... :clap:

..compare it with the efforts of this dude - who isn't even sure if his 4wd tractor, with front loader for ballast, will be able to pull a 2-furrow plough :roll: - in what looks nice dry, sandy soil: https://www.youtube.com/watch?v=FjzHmpK4kew

Do we have a 'bring a tear to a glass eye' smiley? :cry:

Re: Ford 102 plough

Posted: Sun Mar 12, 2017 1:21 am
by oehrick
OK Deutz, that may well be the case - Ransomes made some models marked variously Ransomes, FR and Ford and then didn't load the internet with pictures and specifications ready to help us 50 years later :scratchhead: - nor do they appear to send Brian a Bottle of something nice each Christmas to thank him for covering this oversight for them ;)

Once you get some pictures sorted there should by plenty of help for you